Linkedin

PP Woven Silt Fence Manufacturer in India

PP woven silt fence is a temporary sediment-control barrier made from woven polypropylene fabric, staked along the downhill edge of a construction site to filter sediment out of stormwater runoff before it leaves the site. Compared to non-woven silt fence fabric, PP woven fabric offers significantly higher tensile strength and tear resistance, making it less prone to failure during heavy rain or high-wind conditions. Aeroflex Neu manufactures UV-stabilized PP woven silt fence fabric in standard and custom rolls, GSM, and widths for construction, land development, and roadway erosion control.

Get In Touch

PP Woven Silt Fence Manufacturer in India

PP woven silt fence is a temporary sediment-control barrier made from woven polypropylene fabric, staked along the downhill edge of a construction site to filter sediment out of stormwater runoff before it leaves the site. Compared to non-woven silt fence fabric, PP woven fabric offers significantly higher tensile strength and tear resistance, making it less prone to failure during heavy rain or high-wind conditions. Aeroflex Neu manufactures UV-stabilized PP woven silt fence fabric in standard and custom rolls, GSM, and widths for construction, land development, and roadway erosion control.

Get In Touch

PP Woven Silt Fence Specifications

Fabric Type
Woven polypropylene (higher strength than non-woven alternatives)
Standard Heights
24 in, 36 in (most common), 42 in
GSM
Custom - contact for available range
UV Stabilization
Yes
Color
Black or as specified
Roll Length
Custom (standard construction rolls available)
Filtration
Engineered to retain sediment while allowing water to pass through

Contact our team to confirm GSM and roll length options for your project's specification requirements.

How to Install PP Woven Silt Fence

  • Lay out along the contour - Install the fence following the contour of the land (not straight up/down a slope) so runoff spreads out rather than concentrating at one point.
  • Trench the base - Dig a trench approximately 4–6 inches deep along the layout line.
  • Set posts on the downhill side - Space posts every 6–8 feet (tighter on steep slopes), driven 12–18 inches into the ground.
  • Place and secure the fabric - Position the fabric with the bottom edge in the trench, attach securely to posts with staples, wire, or zip ties, keeping the fabric taut with no sagging.
  • Backfill and compact - Fill the trench with the excavated soil and compact firmly to prevent water from undercutting the fence.
  • Inspect regularly - Check weekly and after every significant rainfall; remove trapped sediment once it reaches roughly one-third of the fence height.
Always confirm installation specifications against your project’s SWPPP or governing DOT standard, as exact trenching depth, post spacing, and height requirements vary by jurisdiction.

Woven vs. Non-Woven Silt Fence - Why It Matters

If your material is flammable, combustible, or handled near ignition sources, static control matters:
FeatureWoven PP Silt FenceNon-Woven Silt Fence
Tensile strengthHigh - resists tearing under wind and water pressure loadLower - more prone to tearing
FiltrationPrecisely engineered opening size for sediment retentionGenerally higher flow-through, can allow more fines to pass
Best forStandard-duty and heavy-duty applications, longer runsLight-duty, short-term applications
CostModerateLower
For most construction sites – especially those with longer fence runs, higher wind exposure, or heavier expected sediment load – woven PP fabric is the stronger, more failure-resistant choice, which is why it’s the material most state DOT specifications default to for standard installations.

Advantages of PP Woven Silt Fence

Strength

Woven polypropylene fabric resists tearing and failure under wind load and water pressure far better than non-woven filter fabrics, reducing mid-project replacement.

Durability

UV-stabilized fabric resists degradation from sun exposure, maintaining performance across long-duration projects rather than becoming brittle within weeks.

Effectiveness

Engineered filtration allows water to pass through while retaining sediment, protecting downstream waterways and helping meet stormwater compliance requirements.

Versatility

Suitable for construction sites, land development, roadway projects, and both urban and rural applications.

Frequently Asked Questions

A silt fence is a temporary sediment-control barrier used on construction sites to filter sediment out of stormwater runoff before it leaves the site, protecting nearby waterways and helping meet erosion-control compliance requirements.
Silt fence fabric is typically trenched 4–6 inches deep, though specific depth requirements vary by state DOT or project SWPPP specification - always confirmed against your governing standard.
36 inches is the most common silt fence height for standard installations, though 24-inch and 42-inch options are also used depending on slope, sediment load, and specification requirements.
Woven PP silt fence has significantly higher tensile strength and tear resistance than non-woven fabric, making it the preferred choice for standard and heavy-duty installations, longer fence runs, and higher-wind conditions.
Posts are typically spaced 6–8 feet apart, tightened to 4–6 feet on steeper slopes or higher-flow areas - check your project specification for exact requirements.
Silt fences should be inspected weekly and within 24 hours of any significant rainfall event, with trapped sediment removed once it reaches about one-third of the fence height.
Yes. Aeroflex Neu's PP woven silt fence fabric is UV-stabilized to resist degradation and maintain strength over extended outdoor exposure.
Yes. PP Woven Silt Fence fabric is designed to provide permeability so that water can pass through while sediment particles are retained. This helps manage runoff without completely blocking water flow.
Yes - height, GSM, roll length, and color can be customized to project specification. Contact our team with your requirement for a quote.

Get In touch

Tell us your GSM, width, color, and quantity requirement – our team responds with a quote within 24 hours.

+91 998 3349242

+91 294 2490534

Address : E- 260-261, Mewar Industrial Area, Opp. UCCI, Madri, Udaipur – 313003,
Email : customer.care@aeroflexneu.com